transport & shipment of used machines

chassis reachstacker on oog 40´flatrack
chassis reachstacker on oog 40´flatrack
telescopic boom reachstacker on 40´flatrack
telescopic boom reachstacker on 40´flatrack
counterweight and spreader reachstacker on 40´flatrack
counterweight and spreader reachstacker on 40´flatrack

Here some information on how maritime transport is done.

Most of our machines are in our workshop in the port of Hamburg or working on the site of our rental customers on the terminals. As we are inside the port we have several possibilities to ship your machine to your port of destination. We cooperate with several shipping lines like and can assist you with transport & shipment of used machines.

 

It is also possible to ship the machines from other ports like Antwerp, Amsterdam, Bremerhaven if this is more suitable.

We also take care of the heavy road transport for bringing the machine to the shipment terminal and also take care of customs documents and documents of the chamber of commerce if necessary.

 

Sometimes the sea connections allow a transport of the machine in a completely assembled state in a piece on a roro ship. This is the case for a big forklift or reachstacker, which usually have a maximum height of 4,700 mm.

 

However, roro transport is very expensive or there is no sea connection to the port of destination. Therefore the machine has to be dismantled. When dismantling the machine we mark the hydraulic and electrical connections with colours so that the assembly is not complicated.

 

The sea transport is done as you can see in the pictures.

 

If it is a reachstacker / containerstacker we ship as follows :

  1. the chassis is tied to a 40' flatrack with overdimensions
  2. we put the mast in an open top 40' container or a 40' container
  3. the counterweight and the spreader we put on flatrack 40'.

 

 If it is an empty container handler / container forklift we ship as follows :

  1. the chassis is tied to a 40' flatrack with overdimensions
  2. we put the mast and spreader in an open top container 40'
chassis empty container-handler on oog flatrack 40´
chassis empty container-handler on oog flatrack 40´
liftmast and spreader empty container-handler on flatrack 40´
liftmast and spreader empty container-handler on flatrack 40´